New Hybrid Water Heater
We supply and install a new hybrid heat pump water heater from Rheem, A.O. Smith, or Bradford White. We size it to your household and set the temperature for efficiency.
Licensed plumbers for efficient hybrid water heater installs in Littleton
Hybrid Heat Pump Water Heater Installation Littleton CO Done Right
Hybrid Heat Pump Water Heater Installation Littleton CO is what we do best. Our licensed team installs Rheem, A.O. Smith, and Bradford White hybrid units across Arapahoe County. If you're tired of high energy bills or a tank that's on its last legs, we'll get you into a new hybrid water heater with same-day service and upfront pricing. Call us today.
Careful work. Honest options.
About this service
Hybrid Heat Pump Water Heater Installation Littleton CO
Hybrid Heat Pump Water Heater Installation Littleton CO is the process of removing your old tank or tankless unit and installing a heat pump water heater that pulls warmth from the surrounding air to heat your water. These units use a compressor and evaporator coil instead of a gas burner or standard electric element. We handle the whole job: sizing, permits, electrical checks, plumbing connections, and testing. Most installs take four to six hours, and we leave your utility room cleaner than we found it.
Homeowners across Littleton call us when their old water heater is leaking, making popping sounds from sediment buildup, or when they want to cut energy use by up to 60%. Our heat pump water heater installation services near Littleton cover everything from simple swaps to complex retrofits. If you're in Ken Caryl or Bow Mar and need a new hybrid water heater installation Littleton, we can usually get to you the same day.
- ✓ Lower Energy Bills
- ✓ Same-Day Installation
- ✓ Code-Compliant Work
- ✓ Longer Equipment Life
What's included
What's Included in Your Hybrid Install
When you hire us for a hybrid heat pump water heater installation, you get a complete job, not a partial one. Here's what's covered. If you need extras like electrical panel upgrades or new venting, we'll quote those separately before we start.
Permit and Inspection
We pull the required permit from Arapahoe County and schedule the inspection. You don't have to deal with the paperwork or the inspector.
Electrical and Plumbing Connections
We connect the water lines, install the T&P valve and expansion tank, and wire the unit to code. We check your panel to make sure it can handle the load.
Condensate Management
Hybrid units produce condensate. We install a drain line or condensate pump to route it safely away from your home.
Old Unit Removal
We drain and disconnect your old water heater, haul it away, and dispose of it properly. No extra charge for removal.
Testing and Walkthrough
We fill the tank, purge air, test the thermostat and heating element, and show you how to use the controls. You get hot water before we leave.
How it works
Our Hybrid Water Heater Installation Process
You call or book online. We ask about your current water heater, household size, and any leaks or noises. We give you a ballpark range and schedule a visit, often the same day. No waiting around for a callback.
Our licensed plumber arrives on time, inspects your current setup, and checks your electrical panel, venting, and space. We measure for the new hybrid unit and confirm the price in writing before we start. Takes 20-30 minutes.
We shut off the water and power, drain the old tank, and disconnect the plumbing and electrical. If there's sediment or scale buildup, we clean the connections. We haul away the old unit for free.
We set the new hybrid water heater, connect the water lines, install the T&P valve and expansion tank, and wire it to code. Then we fill the tank, purge the air, and test the thermostat and heating element. Four to six hours total.
We show you how to set the temperature, change the filter, and switch between heat pump and electric modes. We clean up the workspace and leave you with a warranty packet. You get hot water immediately.
STEP 01Phone Assessment
You call or book online. We ask about your current water heater, household size, and any leaks or noises. We give you a ballpark range and schedule a visit, often the same day. No waiting around for a callback.
Tools & methods
Tools and Methods We Use
Pipe Wrench and Tube Cutter
For cutting and fitting copper or PEX water lines. We make clean cuts and tight connections to prevent leaks.
Soldering Torch
For soldering copper joints when needed. We use lead-free solder and follow EPA Lead-Safe practices on older homes.
Multimeter and Thermostat Tester
To test electrical connections, heating elements, and thermostats. We verify the unit is wired correctly before we power it up.
Anode Rod Socket and Element Wrench
For servicing the anode rod and heating element. We check these at install and show you how to maintain them.
Descaling Pump
For flushing tankless units and removing scale. We also use it to clean hybrid units if needed.
Inspection Camera
To look inside walls or check for leaks behind the unit. It helps us find problems without tearing into your walls.
Real results
Before and after.
Hybrid Heat Pump Water Heater Installation
From Leaking Tank to Hybrid Efficiency
A 12-year-old electric tank in Ken Caryl was leaking from the drain valve and making popping sounds. The homeowner was worried about water damage and high bills.
After: We installed a 50-gallon Rheem hybrid water heater. The leak was fixed, and the new unit cut their water heating costs by 55%. They also got a $300 rebate from their utility.
Book this service →
Hybrid Heat Pump Water Heater Installation
Same-Day Swap in Downtown Littleton
A family of five in Downtown Littleton woke up to no hot water on a Saturday. Their old gas tank had a failed thermocouple and was 15 years old.
After: We replaced it with a hybrid heat pump water heater the same day. They now have endless hot water and a quieter system. Their gas bill dropped, and they love the lower energy use.
Book this service →
Hybrid Heat Pump Water Heater Installation
Basement Retrofit in Bow Mar
A homeowner in Bow Mar wanted to replace their old electric tank but had limited space and no floor drain. They were concerned about condensate.
After: We installed a hybrid unit with a condensate pump that routes water to a utility sink. The install took six hours. Their electric bill dropped by $50 per month.
Book this service → Problems we solve
Problems We Solve with Hybrid Installs
If your water heater is failing or your energy bills are climbing, a hybrid install can fix the root problem. Here are the issues we see most often in Littleton.
Ask a pro →Old water heater leaking or rusting
We remove the old unit, inspect for water damage, and install a new hybrid water heater. We also check the drain pan and shut-off valve to prevent future leaks.
High electric bills from old tank
A hybrid heat pump water heater uses 50-60% less electricity. We size it right and set it to the most efficient mode for your household, cutting your bills significantly.
No hot water or inconsistent temperature
We diagnose the issue and, if replacement makes more sense than repair, we install a new hybrid unit. You get reliable hot water and lower energy costs.
Sediment buildup causing popping sounds
We flush the tank and, if the unit is near the end of its life, we install a new hybrid water heater. We also add a sediment filter if your water is hard.
Proof you can check
Licensed, Insured, and Warrantied
- Colorado Master Plumber License · State of Colorado
- NATE Certification · North American Technician Excellence
- EPA Lead-Safe Certified · U.S. Environmental Protection Agency
- Backflow Prevention Certification · State of Colorado
Most hybrid heat pump water heater installations in Littleton run $1,800 to $3,500 in 2026, including the unit, labor, and permit. The price depends on tank size, electrical work needed, and whether we're swapping an existing tank or doing a new install. We give you a written quote before we start.
Yes, for most Littleton homes they pay for themselves in four to six years through energy savings. They use 50-60% less electricity than standard electric tanks. If you have a gas water heater now, the savings are smaller but still real. We'll run the numbers for your household.
We do. Littleton Plumbing Solutions installs hybrid heat pump water heaters across Littleton and Arapahoe County. Our plumbers are licensed, insured, and factory-trained on Rheem, A.O. Smith, and Bradford White units. Call us at +1 (303) 879-0886 to schedule.
A standard swap takes four to six hours. If we need to run new electrical, add a condensate drain, or modify venting, it can take a full day. We'll tell you the timeline when we give you the quote so you can plan around it.
Ready when you are
Ready for Hybrid Heat Pump Water Heater Installation Littleton CO?
Call us today for a free quote on your hybrid water heater install. We offer same-day service, upfront pricing, and a labor warranty on every job. Our licensed plumbers are ready to help you cut energy costs and get reliable hot water.
Get a Free Quote +13038790886 →
Request an appointment
Contact Littleton Plumbing Solutions
Call us at +1 303-879-0886 or send an email to info@littletonplumbingsolutions.com. We answer the phone 24/7 for emergencies and book regular service Monday through Friday. Most calls get a same-day slot, and we will give you a real arrival window, not a four-hour block.
Call anytime+13038790886Email the officeinfo@waterheaterrepairlittleton.com
Office hoursOpen 24 hours · 7 days a week